SKF TKTI 10, Instructions For Use Manual

Page: 21 / 32

20 SKF TKTI 10
Measurement
Options
•
Temperature alarms
Select “High”, “Low”, or “High & Low”.
Visual and audio (if enabled in Audio setting menu) alarms will be
triggered if either cursor or a point within the designated area is higher
or lower than a set temperature. The high and low set temperatures
may be adjusted by means of Direct access button 1 and the navigation
buttons.
Alarm temperature setting
Temperature alarms
4.4.3 Menu Camera Settings
Camera
Settings
• LCD Brightness
Select from 1 (low) to 9 (high) to control the screen brightness to
save battery power.
• Caption Mode
Select “On” to enable the addition of a text caption when saving an
image. Options will then be displayed when saving an image, to be
selected by means of Hotkey 2 and Hotkey 3.
• Auto Off
Select “5 Mins”, “10 Mins”, “20 Mins” to allow the camera to switch
itself off after a defined period of inactivity in order to save power.
Always on means that the Auto off function is disabled.
• Camera Reset
Select Direct access button 3 to restore the factory settings.