SKF Lincoln HTL 201, Assembly Instructions Manual

Page: 58 / 58

R
ef:
As
sembl
y ins
tr
uctions 951-171-044-EN
SKF Lubrication Systems Germany GmbH
Hauptverwaltung, Standort Walldorf Standort Berlin Standort Hockenheim
2. Industriestraße 4
68766 Hockenheim
Tel. +49 (0)6205 27-0
Fax +49 (0)6205 27-101
V orsitz ender des Aufsichtsrates: Martin Johannsmann · Geschäftsführer: Volker Pieschel · Sitz der Gesellschaft: Schweinfurt · Registergericht: Schweinfurt. HRB 6841 · Ust-IDNr: DE814727059
Motzener Straße 35/37
12277 Berlin
Tel. +49 (0)30 72002-0
Fax +49 (0)30-72002-111 Heinrich-Hertz-Straße 2-8
69190 Walldorf
Tel. +49 (0)6227 33-0
Fax +49 (0)6227-33-259
EC Declaration of
Incorporation acc. to Machinery Directive 2006/42/EC,
Appendix II Part
1 B
The manufacturer, SKF Lubrication Systems Germany GmbH, Walldorf Plant, Heinrich-Hertz-Str. 2-8, DE - 69190
Walldorf, hereby declares conformity of the machinery
Designation: Hydraulically driven lubrication pump for the feeding of lubricants
Type: HTL 201
Item number: 642-41380-*
Year of manufacture: See type plate
with all of the below-listed essential safety and health protection requirements from Machinery Directive 2006/42/EC.
1.1.2 · 1.1.3 · 1.3.2 · 1.3.4 · 1.5.8 · 1.7.1 · 1.7.3 · 1.7.4
at the time of placing on the market.
The special technical documentation described in Annex VII, Part B of this Directive has been compiled. We under-
take to transmit, in response to a reasoned request by the national authorities, the special documents for this partly
completed machine. The Manager of Technical Standardization is the authorized representative for the technical
documentation.
See the manufacturer information for the address.
Furthermore, the following Directives and (harmonized) standards were applied in the applicable areas:
Standard Edition Standard Edition
DIN EN ISO 12100 2011 DIN EN 50581 2013
DIN EN 809 2012 DIN EN 60947-5-1 2017
DIN EN 60204-1 2007
Correction 2011
The partially completed machinery must not be put into service until the machinery into which it is to be installed has
been declared in conformity with the provisions of Machinery Directive 2006/42/EC and all other applicable Directives.
Walldorf, July 31, 2018
Jürgen Kreutzkämper
Manager R&D Germany Stefan Schürmann
Manager R&D Hockenheim/Walldorf