Safety instructions
The described product was manufactured in
accordance with all generally acknowledged
regulations pertaining to technology, occu-
pational safety, and accident prevention.
However, dangers that can cause physical
injury to persons or damage to other mate-
rial assets might still occur during the use of
the product.
Intended use
The described product is projecting oil wit-
hout air for the lubrication of chains and is
intended for use in centralized lubrication
systems. Other use or use beyond this pur-
pose is considered unintended.
Products of SKF must not be used in
conjunction with substances and mixtures
classified as hazardous by the Annex I part
2-5 of the CLP regulation (EC 1272/2008),
and identified with hazard pictograms
GHS01-GHS06 and GHS08.
None of the products manufactured by
SKF can be used in conjunction with gases,
liquefied gases, pressurized gases in solution
and fluids with a vapor pressure exceeding
normal atmospheric pressure (1013 mbar)
by more than 0.5 bar at their maximum per-
missible temperature.
Unless otherwise noted, products of SKF
must not be used in conjunction with explo-
sive atmospheres according to the ATEX-Di-
rective 2014/34/EU.
!
These instructions must be read
and understood by all persons
who are involved with the installation,
operation, maintenance, and repair of
the product. The mounting and opera-
ting instructions must be kept close to
the equipment for future reference.
Note that these installation instruc-
tions is an integral part of the product. It
must be handed over to the new opera-
tor of the product if the product is sold.
!
In addition to the information pro-
vided in the installation instruc-
tions, all generally applicable regulations
on accident prevention and the environ-
ment must be observed.
!
All products from SKF may be
used only for their intended pur-
pose as described in these instructions
and in any brochures.
4
