Introduction to the CMAC 4230 Wireless Infrared Thermometer
Laser Safety
Wireless Infrared Thermometer CMAC 4230
1 - 3
User Manual
Errors and load restrictions
If there is a possibility of the safety of the device being hampered, the device must be
taken out of operation and removed from the hazardous area immediately.
Accidental re-commissioning of the device must be prevented. We recommend
sending the device to the manufacturer for examination.
The safety of the device may be at risk if, for example:
damages are visible on the casing
the device has been subjected to excessive loads for which it is not designed
the device has been improperly stored
the device has been damaged in transit
labels on the device are illegible
malfunctions occur -obvious measuring inaccuracies occur
measurements using the device are not possible any longer
permitted threshold values have been exceeded
Laser Safety
The following safety regulations must be also observed:
Warning! Laser beam! Do not look directly into the laser beam! Do not aim the
beam at other people! Danger of eye damage!
Laser class 2
Power < 1 mW
Wave length 635 nm
Technical specifications
Measuring range:
-30 to +900 °C
Display resolution:
0.1 °C
Ambient temperature:
0 to +50 °C; laser operation up to a
maximum of 45 °C
Storage temperature:
-20 to +50 °C (without batteries)
Batteries / power supply:
2 x LR06 (AA) type approved in
compliance with IEC
Emissivity:
0,10 to 1.50 (0.95 preset)
Measuring spot marking:
3 point laser marking
