SNB-PX24 PLANER MANUAL
8
6/2016
1)
Lift the breaker, and use the wrenches to loosen the bolt on the pressing strip, take out
the blade for sharpening or changing
2)
Setting and adjustment of planer blade:
a)
Make sure both ends of blade machine are even and fixed, and then adjust four
adjustable bolts to keep them in the same position (1mm more or less).(Graph B)
Graph B
b)
Put two springs into the 2 hold
￠
at the bottom of blade groove.
c)
Insert the planer blade and pressing strip to the blade groove. The elasticity of the
two springs will make the blade and blade edge spring to the arc surface of the
blade machine. Tighten the fastening bolt of pressing strip.
d)
Set one blade at a time, whilst keep all blades in the same position. Finally inspect
the fastening of all bolts of pressing strip to avoid the blades from getting loose and
causing damage.
3)
Adjustment for bearing pressure of press roller
The pressure of spring on top of bearing of the pressing roller is adjusted at the factory.
The user can adjust by turning the left or right wheel to tighten or loosen. The left-hand
threaded nut tightens the spring, whereas the right-hand threaded nut loosens the
spring (Graph C)
Graph C
Summary of Contents for SNB-PX24
Page 1: ...SNB PX24 25 PLANER MANUAL...
