SNB-PX24 PLANER MANUAL
5
6/2016
3.
ELECTRICAL CONFIGURATION
The motor is controlled by a magneto-electricity starter. This provides the advantages
of a simplified connection, easy operation and over load prevention. In the graphic
below, electric principle A, connecter will be looped when the start button is pulled, and
then the loop will be locked as the power gets through the connecter to make the
motor run. The relay FR will work and make KMI lose press when the motor is under
over loading and KMI will switch off.
NOTE: The wiring for this planer is four-core cable. Please make sure the earth
installation is safe before setting.
4.
OILING SYSTEM
The planer should be oiled by hand regularly to extend the working life, maintain a smooth
operation, as well as improve the working efficiency., Oiling should be done on relevant
parts with minimal oil to avoid oil run over which wastes oil and damages other parts. Refer
to oiling instructions below:
Summary of Contents for SNB-PX24
Page 1: ...SNB PX24 25 PLANER MANUAL...
