basis.
Notices
1. Abrasive cleaners will damage this product.
2. Never use oven cleaner to clean any part of this product.
Before Each Use:
1. Keep the area clean and free from any combustible materials, gasoline, and other
flammable vapors and liquids.
2. Do not obstruct the flow of the combustion of LP and the ventilation air.
3. Keep the ventilation opening(s) of the LP gas tank area free and clear from debris.
4.
See “Cleaning Instructions” for proper cleaning instructions.
Cleaning Instructions / Routine Service
To ensure maximum performance and to lengthen the life of this device, perform these
steps each time your tank is empty. This model will consume a standard LP gas grill
tank every 28-30 days.
Note: _While unit is in use, check the following every 2-3 days:
• Check air passages for blockage.
1.
Turn LP gas tank valve to “CLOSED.”
2.
Disconnect LP gas tank per “Disconnecting LP Gas Tank” instructions.
3. Remove rain cover from top of SkeeterVac.
4. Remove used TacTrap and dispose of properly.
5. Remove used FineTune lure (if necessary) and properly dispose.
6. Note: FineTune Lure lasts at least 60 days.
7. Lift engine and post off empty LP gas tank, and place on ground.
8. Remove empty LP gas tank.
9.
Connect full LP gas tank per “Installing LP Gas Tank” instructions.
10.
Slide fresh TacTrap in place and remove protective paper.
11.
Remove fresh FineTune lure from package. Dispose of packaging properly.
12.
Place FineTune lure back into holder with holes on orienting upwards.
13.
From the illustrations provided, select the environment that best matches the
area you are protecting
14.
Position the ring so it points to your environment. (Figures 3a, 3b and 3c).
15.
Check engine and gas lines for any sign of damage or missing parts. Repair any
problems before attempting to start.
16.
Connect LP gas tank per “Connecting LP Gas Tank” instructions.
17.
Perform leak check per “Checking for Leaks” instructions.
18.
Light per “Lighting” instructions.
19.
Wash hands with soap and water.
Replacing Igniter Battery
If you do not hear a clicking sound when the igniter button is depressed, the battery may
have lost its charge. Replace battery as follows:
1.
Turn LP gas tank valve to “CLOSED.”
2. Open battery compartment by turning cap on bottom of engine counterclockwise.