7
SFC_Nikki_Rigging_Guide_vol 1.2_Oct 2019
Trolley
The flat pack trolley is quickly and easily assembled with spring clips.
1.
To join the trolley centre bar and the trolley rear bar together, push the spring clip in and insert the
centre bar into the square tube on the trolley rear bar. The spring clip will click into the hole.
2.
To insert the axles, again push the spring clip in and insert the axle into the tube on the trolley rear
bar. The spring clip will click into the hole on the underneath side of the tube.
Repeat for opposite side.
3.
To attach the wheels, place the wheels onto the axle, then place the washer over the axle. Insert
the linch pin into the hole on the outside of the axle.
4.
To attach the centre t-bar, push the spring clip in and insert the t-bar into upstand on the trolley
centre bar. The spring clip will click into the hole.
