27
SFC_Nikki_Rigging_Guide_vol 1.2_Oct 2019
MAINTENANCE
Maintenance is a key part of looking after your investment and keeping your Nikki in the best possible
working order.
It is most important to thoroughly wash all items with fresh, clean water after each sail.
While the hull, rig, wings and foils are all manufactured from corrosion resistant materials, they can be
susceptible to attack from salt residues especially if left in the hot sun.
It is also most important to remove any silt, sand or abrasive material, especially from all moving components
and the internal surfaces of the bow mechanism, centerboard case, rudder box, mast hole, mast lock pin,
wing tubes, vang system, centreboard, rudder and pushrods.
Unclip the lifting foils and wash thoroughly with fresh water, making sure the push button and t-joint moves
freely.
Always dry foils and hull before placing them in their bags.
Do not leave the foils in sand or mud and avoid leaving them in direct hot sun - this is why protective bags
are supplied.
Never store hulls or foils in damp conditions.
If any repairs to the hull need to be done, ONLY use epoxy resin.
We wish you many happy years foiling and sailing with your Nikki!
skeetafoilingcraft.com