18
SFC_Nikki_Rigging_Guide_vol 1.2_Oct 2019
4.
Insert the pull-down rope into the hole on the top of the rudder and tie a knot. The rudder is pulled
down into place after leaving the shore using this rope.
5.
To lock the rudder into place, pull the retaining toggle pin over the top of the rudder and onto the
opposite side of the rudder box. Insert it through the rudder box and rudder hole. Make sure the
toggle pin nose drops to be engaged properly.
6.
The excess rope can be inserted into the groove in the end of the tiller.