QuickTake 15 Quick Guide
Terms »
Star Button
Turns on LED, toggles between displays, and exits without saving
Up and Down Arrow Buttons
Scroll through presets, increase or decrease sampling parameters, and toggle
between setup options
Button Sequence
or
= Press individually.
[
] = Press both simultaneously.
= Security code, press in sequence
Programming Sequences »
• To activate pump LED:
Press and hold
for 2 seconds.
• To check battery status:
Press
.
• To choose a run time preset:
Press
or
to scroll through presets. Once desired preset displays,
press [
] to start sampling.
• To Run or Hold:
Press [
].
• To repeat a sample run:
From Done, reset (rSEt), or sampling error (SErr), press [
] to return to
run time preset. Press [
] to sample.
• To change or calibrate flow:
Note:
Flow rate does not appear on LED.
Press
or
and scroll to a run time preset. Press and hold CAL for 2 seconds.
(
Does not require a security code.
) Press
or
to change flow rate until desired
flow appears on calibrator. Press
. When Stor displays, press [
] to save
setting or
to ignore changes to flow setting.
• To interrupt run, terminate a sample, or reset pump:
While in Hold, press
. Sample reset (rSEt) will display. Press [
] to reset
pump or
to ignore reset and return to Hold.
www.skcinc.com
SKC Inc., 863 Valley View Road, Eighty Four, PA 15330
