skcinc.com
Form 37171 Rev 200630
Page 22
Set Up Calibration Train
— Constant Pressure Mode
1. Prepare pump and sorbent tubes per Setting/Calibrating Flow Rate from 5 to 500 ml/min
—
Constant Flow Mode.
2. Set up the calibration train (Figures 6 and 7). The All-in-One and CPC are not needed in Constant
Pressure mode. Using tubing, connect the calibrator to the single sorbent tube or the first of
multiple sorbent tubes.
Figure 6. Calibration Train (100 to 1000 ml/min) for Single Tube
— Constant Pressure Mode
Figure 7. Calibration Train (100 to 1000 ml/min) for Multiple Tubes
— Constant Pressure Mode
Tubing
Suction port
Sorbent tube
Tubing
Pump inlet
chek-mate C
alibrator
Pump
Pump
chek-mate
Calibrator
Tubing
Dual adjustable low flow holder
Sorbent tube
Pump inlet
Suction port
Flow adjust screw
