Skanti DSC 9001, Technical Manual, Page: 157 / 178

SELF-TEST
The Self-test menu is selected by pressing:
>TEST< >SELF-TEST<
Automatic self-test is performed to check all test-steps in the self-test. It will stop if a test-step fails or
all tests are completed. If a test-step fails the test will stop and display the failing test-step number,
the failing part of the DSC, the possible cause of failure and an error code. A description of each
test-step along with the error code explanation is listed in this chapter.
Self-test example:
completed without fail.
Self-test example:
completed with 2 fails.
The error code consists of step number (2 digits), indication of previus faults (1 digit: 0=no, 1=yes) and
failure type (1 digit).
If an additional DU is connected a Self-test on that is included in the sequence. The display will indicate
that DU 2 is tested.
TEST Automatic Self-test
Completed 19 steps ok
0 bypassed
0 failed
>END<
Fig. 1
TEST Automatic Self-test
03 Synthesizer test:
Failed
Error code: 0301 >CONTINUE< END
Fig. 2
TEST Automatic Self-test
04 Synthesizer test:
Failed
Error code: 0411 >CONTINUE< END
Fig. 3
TEST Automatic Self-test
Completed 19 steps ok
0 bypassed
2 failed >END<
Fig. 4
SELF-TEST SERVICE
DSC 9000 TECHNICAL MANUAL 5-5