Skandika Fitness OFFICE BIKE SF-2410, Assembly Instructions And User Manual

Page: 14 / 20

14
Hardware Identification Chart
Unpack the box in a clear area. Follow the List of Hardware Kit below. This chart is provided to help
identify the hardware used in the assembly process. Place the washers, the end of bolts, or screws
on the circles to check for the correct diameter. Use the small scale to check the length of the bolts
and screws. Do not dispose of the packing material until the assembly process is completed.
NOTICE
: The length of all bolts and screws except those with flat heads is measured from below the head to the end of the
bolt or screw. Flat head bolts and screws are measured from the top of the head to the end of the bolt or screw.
Note:
Please review below to know the content of the hardware kit Some small parts may
have been pre-attached for shipping. If a part is not in the hardware bag, check to see if it
has been pre-assembled.
Hardware Kit Part No. and Description Q‘ty
29 Lock Washer (M8) 4 pcs
33 Screw (M4x12mm) 4 pcs
39 Bolt (M8xp1.25x16mm) 2 pcs
40 Bolt (M8xp1.25x30mm) 2 pcs
41 Bolt (M8xp1.25x50mm) 1 pcs
49 Bolt, Hex Head (M8xp1.25x50mm) 2 pcs
The following tools
are included for assembly:
Multi Wrench Tool w/
Phillips Screwdriver Allen Wrench
(6 mm)
ASSEMBLY PARTS