Skan ErgoMeter, User Manual

Page: 38 / 64

38
Parts and tools list (followed)
PART NO. DESCRIPTION MATERIAL SPECIFICATION Q’TY
G-5 Self-tapping screw M4x50mm 7
G-6 Seat PVC 1
G-7 Chain cover, left ABS 1
G-8 Screw M4x12mm 8
G-9 Screw 3/16“x3/4“ 6
G-10 Decorative cover ABS 2
G-11 D/C wire with nut 1
G-12 Main frame 1
G-13 Bearing 6203RS 2
G-14 Wave washer ø17,5xø25x0.3t 1
G-15 Washer ø17,5xø25x0.3t 1
G-16 C-Ring ø17 1
G-17 Belt Rubber J6 1092mm 1
G-18 Sleeve for seat post PP 1
G-19 Pop pin ABS M16x27mm 1
G-20 Sensor cable, lower 800mm 1
G-21 Screw M4x10mm 1
G-22 Sensor-Box PE 1
G-23 Sensor holder PE 1
G-24 Cover for handlebars STR 1
G-25 Crank, left 1
G-26 Adaptor PPO
230V~50Hz, 9VDC 1.5A
1
H Handlebars post assembly 1 Set
H-1 Sensor cable, upper 950mm 1
H-2 Handlebars post 1
I Rear stabilizer assembly 1 Set
I-1 Screw 3/16“x3/4“ 4
I-2 End cap, left PP 1
I-3 Height adjusters 3/8“x30mm 2
I-4 End cap, right PP 1
I-5 Rear stabilizer 1
J Front stabilizer assembly 1 Set
J-1 End cap, left PP 1
J-2 Screw M8x40mm 2
J-3 Transportation roll Nylon 2
J-4 Nut M8 2
J-5 Washer ø8xø19x2T 2
J-6 End cap, right PP 1
J-7 Front stabilizer 1
J-8 Screw 3/16“ x 3/4" 4