background image

9

Hearth stones

Heating the sauna stove

Dry 

fi

 rewood is the best for heating the sauna stove. 

Fuels of high heating value should 

not be used for heating the sauna, e.g. 

fi

 breboard, plastic, plywood, charcoal, etc. Liquid 

fuels must not be used in any case. It is recommended by the manufacturer to 

fi

 ll only half 

of the stove with 

fi

 rewood. Filling the furnace at full extent may cause overheating. This 

shortens the service life of the sauna stove signi

fi

 cantly. 

The ash compartment may be open only during starting the 

fi

 re to enable the access of 

additional air needed for burning. During heating the ash compartment has to be closed, 
except when adding 

fi

 rewood or removing the ashes, to avoid smoke spreading into the 

steam room.
Heating the steam room depends on the size of the room, the placement of windows in 

the steam room, power of the stove and the material of walls. In case of non-insulated 
wall surfaces (brick, ceramic plate, concrete, etc.) a powerful stove is required: per every 
m² of the wall 1.2 m³ of additional capacity is needed. In case of log walls the capacity is 

multiplied by 1.5. A properly chosen sauna stove heats the steam room up to the required 
temperature within 1 (one) hour.

Water for steam

Clean water is used for making steam. Salty, hard or water rich in  iron causes corrosion 
and shortens the service life signi

fi

 cantly.

Warranty conditions

The manufacture undertakes to exchange or repair a defective stove within 24 months 
from the date of sale in factory or shop on condition the consumer has not failed to fol-
low the requirements of the installation and the user manual. The warranty is effective on 
condition the stove is used for its intended purpose and the manufactured construction is 
not changed. If the door glass of the sauna stove is broken, the manufacture is not obliged 
to change it.

Stones of the hearth must not block the air circu-

lation between the centre of the hearth and the 
housing.
Some natural stones may contain improper sub-
stances such as sulphur compounds, which make 
them unsuitable for the use as hearth stones.
Clean the stones from dust before you pile them 
on the hearth. Bigger stones are laid at the bot-
tom of the stone base; smoother stones are piled 
along the walls of the stone base. Smaller stones 
are laid out on top because they are heated up 
quickly. The humidity of the steam depends on 
the amount of stones and the temperature of the 
sauna. The more stone and the lower tempera-
ture, the more humid the steam is.

Summary of Contents for PS-110











Reviews: