SK telecom Smart Robot Albert, Manual Book

Page: 7 / 20

ON
07
Front OID sensor
Rear OID sensor
Name and Function of Each Components
Size (W x L x H): 11.5 cm x 11.6 cm x 12.8 cm / Weight: 250 g
Eye LED
Proximity sensor receiver
Mobile phone stand (top)
Mobile phone stand
(bottom)
Battery checkrer
Right distant sensor
Card reading sensor
Left distant sensor
Charging
/Bluetooth indicator lamp
Accessory fixation
Power switch
Side LED
USB charging slot
Power wheel
Speaker
Caster
Mount stand on albert's front side depending
on your smart phone size.
The autonomic mode will begin six
seconds after turning on a power
switch of Albert. Control Albert by
blocking the left and right proximity
sensor with your hand.
Power goes on when power button
is moved to the right. Power goes
off when power button is moved to
the left.
Connect your smart phone charger (Micro 5pin charger) to
the charging terminal in the rear of robot main body and
charge.
Separate charger when red charging light in the front of robot
main body goes off
.
Autonomic Mode Smart Installation Turn on
the power switch
How to charge robot
with a click Push
and fix
Lift and fix
Charge slot
Charging