SK telecom Smart Robot Albert, Manual Book

Page: 15 / 20

15
Peripherals Deletion
& Reconnection
Touch Robots tab on bottom and go
to the Peripheral device registration
menu. Touch the Recycle Bin but-
ton on the top. This will delete the
peripheral device.
Recharging
Problem Solution Tip!
1. Connect smart phone charger with albert or peripheral device.
2. When charging the battery of albert or peripheral device, battery lamp is turned red, and
When charging is completed, the light is turned off.
1. Robot makes no or slow movement.
2. Robot make no or slow recognition of Smart Dice.
3. Smart Pen makes no recognition of books.
4. What if having a phone call when using Robot?
5. When Robot is connected normally, it moves with sound of
‘Hello! My name is albert of SK Telecom. I’m happy to meet you, master.’
Check the battery of Robot or peripheral device and recharge it or make reconnection.
Set ‘Do Not Call’ in Setting menu in Launcher.
If Robot does not make this sound, refer ‘Robot Deletion & Reconnection’ in User Manual.
albert Recharging Time
2.5 hours (for full charge)
Battery lasts 5 hours for continuous operation /
* Recharging time may differ according to operation time.
Smart Pen Recharging Time
1 hour for full charge
Battery lasts 5 hours for continuous operation / 2 months for
standby
Smart Dice Recharging Time
30 minutes for full charge
2 weeks for standby / 1000-times dice throw after full charge
Get Ready to Play with albert