background image

Headboards x 2

Side panels x 2

Base x 1

60 mm Base and panel 

connectore bolts x 12

Metal cross 

dowel x 12

Capping screws 

x 4

Parts List

Due to the heavy nature of the cot, it is recommended assembly is undertaken by two people.

Warning

Safety Consideration for your Child.

  Follow the manufacturer’s assembly instructions in detail to ensure the safety features of the cot are not compromised.
  ENSURE THE COT IS NOT PLACED TOO CLOSE TO HEATERS, BLINDS, CURTAINS, WINDOWS OR POWER POINTS.
  DO NOT HANG ANYTHING NEARBY WHERE THERE IS A POTENTIAL DANGER OF THE ITEM FALLING INTO THE COT.
  KEEP ANY MEDICATION, STRING, ELASTIC, SMALL TOYS OR SMALL ITEMS SUCH AS MONEY OUT OF REACH FROM 

ANY POSITION IN THE COT.  It is advisable to keep all items out of your child’s cot to prevent suffocation or strangulation. 

  TO PREVENT FALLS, THE BASE OF THE COT SHOULD BE ADJUSTED TO THE LOWEST POSITION BEFORE YOUR 

CHILD CAN SIT UP.

Recommended Mattress Size. 

  This cot has been manufactured for use with a mattress which measures 690 mm (69 cm) wide x 1300 mm (130 cm) 

long x 120 mm (12 cm) (maximum thickness). The width and length are speci ed because it is IMPORTANT that the gaps 

between the mattress and the sides and ends of the cot do not exceed 40 mm when the mattress is pushed to one side or 

end, and 20 mm when the mattress is centred in the cot. This is to minimise the risk of a child’s limb becoming caught in 

the gap. The thickness of the mattress has been speci ed to ensure that the depth of the cot is greater than 500 mm with 

the mattress base in the lower position to minimise the risk of a child climbing or falling out of the cot.

Safety Consideration for Cot.

  Re-tighten all connector bolts (at least two months after assembling the cot), as some may loosen as the cot settles. 

Regulary check all of the connecting bolts, making sure they are tight.

  Regularly check cot for weakness in timber joints and timber panels. If any weaknesses are found, report immediately to

 

Tasman Eco via: www.tasmaneco.com.au

  Do not use cot if it has been damaged in any way and always use genuine Tasman Eco parts. Contact your nearest 

Tasman Eco stockist or original place of purchase for spare parts

2

Summary of Contents for tasman Essentials Palermo







Reviews: