manualshive.com logo in svg

Sizewise 33060400, User Manual, Page: 25 / 71

Share
Download
Sizewise 33060400 User Manual Download Page 25

24 

Protocol: Set Alert Reminder 

The protocol reminder is a timer that can be set for 1, 2 or 4 hours as a reminder that the patient 
needs to be attended to or checked on.  There are three alert settings for the protocol alarm. 

1. Access  the  Menu  by  pressing  the  UP  or  DOWN  arrow  until

PROTOCOL REMIND is highlighted and then press ENTER.

2. Choose from one of the three alert types and then press ENTER.  The selection has now

been completed and the user will be returned to the Home Screen.

NOTE: 

The  protocol  audible  tone  is  specific  and  is  unchangeable  to  ensure  differentiation 

between  a  bed  exit  alarm  and  a  protocol  alarm.    The  protocol  alarm  will  have  short  frequent 
beeps. 

Protocol Timer: Sound Level Setting 

There are 3 sound levels for the bed exit alarm/protocol reminder. 

Press the sound level button once for low volume, twice for medium volume, and a third time for 
high volume.  By pressing the sound level button for a fourth time, the sound level will be reset 
to low volume. 

Low Volume 

Medium Volume 

High Volume 

NOTE: 

When the bed exit alarm and protocol timer are disabled, the sound level indicator lights 

will be OFF.  This indicates that the sound level has been disabled. 

Summary of Contents for 33060400








































































Reviews:

No comments