manualshive.com logo in svg

Sizewise 33060400, User Manual

The User Manual for Sizewise 33060400 is available for free download on our website. This comprehensive manual provides step-by-step instructions and detailed information about operating and maintaining the product. Get your manual today from manualshive.com and unleash the full potential of your Sizewise 33060400 device.

Share
Download
background image

12 

Specifications 

SW Evolution™ Specifications 

Quality Assurance Standards ............................................................. CSA C22.2 No. 601.1 

IEC/EN 60601-2-38 

IEC/EN 60601-1 

IEC 60601-1-2 

Degree of Protection Against Electric Shock ............................................................ Type B 
Degree of Protection Against Ingress of Water ............................................................ IPX4 

Electrical Rating........................................................... 120VAC 60Hz, 4 amps (US model) 

230VAC 50/60Hz, 4 amps (non-US models) 

Duty Cycle ....................................................... 2 Min ON / 18 Min OFF Cycle (US model) 

2 Min ON / 18 Min OFF Cycle (non-US models) 

Battery Power........................................................24V Gel Access Restricted (2-12V 5Ah) 
Fuses .......................................................................................................... 4 amp time delay 

Overall Width –  35” / 89 cm ........................................................................... 37.5” / 95 cm 

39” / 99 cm ..................................................................... 41.5” / 105.5 cm 
48” / 122 cm (optional wing kit) .................................... 50.5” / 128.5 cm 

Overall Length ............................................................................................ 89.5” / 227.5 cm 
Length ............................................................................................................... 80” / 203 cm 

Deck Low (without mattress)................................................................................ 9” / 23 cm 

Deck High (without mattress) ............................................................................. 30” / 76 cm 

Trendelenburg .................................................................................................................. 15º 
Reverse Trendelenburg .................................................................................................... 15º 
Head Section .................................................................................................................... 58º 
Knee Section .................................................................................................................... 49º 
Foot Section ....................................................................................................................... 8º 

(Angles have 2º +/- variance) 

Bed Weight .................................................................................. 400-420 lbs. / 181-190 kg 

(Weight depends on options on the bed) 

Bed Weight with Optional Expandable Deck ............................................. 564 lbs. / 256 kg 
Optional IV Pole Weight .................................................................................... 3 lbs. / 1 kg 
Optional Trapeze Weight ................................................................................ 80 lbs. / 36 kg 

Summary of Contents for 33060400








































































Reviews:

No comments

Related manuals for 33060400

Camozzi 50 Series Mounting Instructions preview
50 Series
Brand: Camozzi Pages: 2
Oktober 7 Operation Manual preview
7
Brand: Oktober Pages: 22
Xiitech 1060 Operation Intructions preview
1060
Brand: Xiitech Pages: 6
EuroLite 51930455 User Manual preview
51930455
Brand: EuroLite Pages: 28
QRS PMII Upgrade Instructions preview
PMII
Brand: QRS Pages: 16
QMAXZ Lighting QS Series User Manual preview
QS Series
Brand: QMAXZ Lighting Pages: 36
Yamaha Motif-Rack XS Code List preview
Motif-Rack XS
Brand: Yamaha Pages: 48
Major tech MT474 Instruction Manual preview
MT474
Brand: Major tech Pages: 12
GSi ARIEDO HDC 300W Installation Manual preview
ARIEDO HDC 300W
Brand: GSi Pages: 28
Nippon Genetics FastGene NG040 Instruction Manual preview
FastGene NG040
Brand: Nippon Genetics Pages: 14
Hanna Instruments Groline HI981412 Instruction Manual preview
Groline HI981412
Brand: Hanna Instruments Pages: 44
Bowa ARC 400 Operating Manual preview
ARC 400
Brand: Bowa Pages: 140
Toparc MATCHPEN Manual preview
MATCHPEN
Brand: Toparc Pages: 32
Softing IT Networks LinkXpert Manual preview
LinkXpert
Brand: Softing IT Networks Pages: 54
Velp Scientifica UDK 139 Operating Manual preview
UDK 139
Brand: Velp Scientifica Pages: 123
IKA 06-5819 Operating Instructions Manual preview
06-5819
Brand: IKA Pages: 48
Pixlip FP60 LIGHTBOX Assembly Instruction Manual preview
FP60 LIGHTBOX
Brand: Pixlip Pages: 15
G2G Lighting Wensco AnPro180 Stick Quick Start Manual preview
Wensco AnPro180 Stick
Brand: G2G Lighting Pages: 3

Brands by name

Popular brands

Load more brands