SIYI VD32 User Manual Download Page 11

Page: 11 / 106

VD32 Remote Controller User Manual v1.2

- 11 -

2020 SIYI Technology Copyright

2 PRODUCT INTRODUCTION

2.1 Product Features

Advanced Spread-spectrum Technology

VD32 transmitting system is applied with

SIYI Technology’s lately upgraded

bidirectional 2.4GHz spread-spectrum technology. The maximum control range

can be 4km (unobstructed, free of interference). VD30 transmitter and its receiver

are linked by a unique matching code, and the enhanced anti-interference ability

supports multiple transmitters working in stability synchronously.

Extraordinary Handling & Accurate Manipulating Experience

VD32

transmitter fits user’s palm perfectly, fashionably streamlined and compact

industrial design.

16-Channel Fast-response Mode

VD32 transmitter is equipped with various types of buttons, dials, and switches. 16

channels support all kinds of models, including fixed-wings, helicopters, gliders,

Summary of Contents for VD32











































































































Search results

Summary of Contents for VD32

Reviews:

Related manuals for VD32

Brands by name

Popular brands

SIYI VD32, User Manual

Search results

Summary of Contents for VD32

Reviews:

Related manuals for VD32

Brands by name

Popular brands