E
AST
C
HINA
S
HIPBUILDING
I
NSTITUTE
F
ACTORY
1
SIYANG
四洋
R
1.GENERAL PRECAUTIONS
⑴
. Ensure that the engine is securely mounted.
⑵
.Ensure that the ventilation and combustion air dusts are not obstructed.
⑶
.Keep the engine and surrounding areas clean.
⑷
.Never allow any part of the body to come into contact with high
pressure fuel oil when testing injection equipment.
⑸
.Avoid contact with exhaust pipe when the engine is, or has recently
been running .These parts can be very hot and can cause severe burns.
⑹
.Rectify all fuel water and oil leaks as soon as possible.
⑺
.Isolate the battery when working on the engine.
⑻
.All drive belts must receive regular attention.
⑼
.Keep electrical contacts free from corrosion etc by smearing them with
petroleum jelly.
⑽
.Batteries under charge release explosive gases, therefore the battery
compartment must be well ventilated at all times. Never allow any
smoking, sparks or flames near the batteries.
⑾
.
Wear protective goggles when handing liquids which is harmful to
eyes, for example, battery acid. If any of these substances are splashed in
the eyes, wash out thoroughly with clean water.
⑿
Many liquids used in engines are harmful if taken internally .In the
event of accidentally swallowing oil, fuel, antifreeze or battery acid obtain
medical assistance immediately.
