E
AST
C
HINA
S
HIPBUILDING
I
NSTITUTE
F
ACTORY
13
SIYANG
四洋
R
restart.
⑥
At low temperature it may be necessary to ease the starting by means
of the start gas.
The operation method is shown as follows:
(1).Open the dust cover of the liquid storage. Insert the pouring liquid
pressure can into the hole of the liquid storage. Squeeze the can to pour
the liquid into liquid storage.
(2).Set the gearbox at idle
position and put the handle of
fuel rack at mid-position.
(3).Start the engine. At the
same time, operate the
hand-pump until the engine
runs stably.
(4).If knocking appears while
the engine is starting; the
operation of hand-pump must
be slowed or stopped, so as to
regulate the injecting liquid
quantity for starting the engine
stably.
CAUTION
:
Keep away from all heat sources (even sun
light).The liquid is highly flammable.
5.2 STARTING BY SPRING STARTER (IF INSTALLED)
1.Air pipe 2.Hand pum p 3.Liquid 4.Liquid pipe 5.Injector 6.Air inlet pipe
low tem p. starting liquid pouring system
