2.2
Operating the armchair (without the lift/with the footrest) using the fingertip
controls in the arm or seat panel.
Your armchair has 3 motors with one extra option. Your control panel has 4 keys.
Each key has a dual function (Function F1 and F2): Pressing a key will cause a motor to move.
The motor will move in the opposite direction if you release the key and press it again.
The front key (1 - footrest) is for operating the footrest. The footrest will unfold when you
press the key; the armchair will move further into the heart balance once the footrest is
fully unfolded. Release the key for a minimum of 2 seconds and press this again to move the
heart balance function and footrest back again.
The second key (2 - heart balance) is for operating the heart balance function. This will allow
you to tilt the armchair in its entirety; the footrest and back will remain in the same position
relative to each other.
Release the key for a minimum of 2 seconds and press this again to move the heart balance
function back again.
The third key (3 - back) is for operating the back. Pressing the key will move the backrest
backwards. Release the key for a minimum of 2 seconds and press this again to move the
back forward again.
The rear key (4 - Your option) is for operating the extra option. This could be an electric top
swing, or the electrically inflatable lumbar support. Pressing this key will move the top swing
forward or inflate the lumbar support. Release the key for a minimum of 2 seconds and
press this again to move the top swing backwards again, or deflate the lumbar support.
---
5
---