Pairing
Press the fingertip keys 1 and 3 for approximately 10 seconds.
• The lighting behind the fingertip controls will flash blue.
• Now briefly press the keys shown on the remote control. A short beep will confirm
the pairing is complete.
3.4 Resetting your armchair.
Your battery may be empty if your armchair is no longer functioning. Charge the battery
as described in point 4. You can perform a reset if the armchair still isn’t functioning. To do
this, press the (first) three keys on your control panel for more than 10 seconds. The lights
behind the controls will light up and one or more motors will start to move, followed by a
beep. The reset will subsequently be complete. You can now use your armchair again.
Please contact your retailer if your armchair still doesn’t work.
---
16
---