To report any issues with this product, please contact our customer service department at (888) 274-8664.
For more information, visit www.sitonit.net
EBEAM ASSEMBLY INSTRUCTIONS
STEPS
20
BLANK FACEPLATE
If no screens were purchased, complete step 20 below to finish the beam.
For optional screen assembly, complete steps 21–26 and continue from there.
20. Align end caps with square shapes and bottom opening at each end of the beam and pound flush into place with a non-
marring mallet/hammer, then peel off protective film.
If no additional accessories were purchased, the beam is now complete.
For other optional accessories, reference:
Power infeed cover installation (page 16).
Vertical wire manager (pages 17–20).
11