Molenvliet 28
3961 MV Wijk bij Duurstede
+31 343 595 400
www.sitetec.nl | [email protected]
In all cases in which we act as offerer or supplier, our offers, assignments given to us and agreements concluded with us are subject to the METAALUNIE
TERMS AND CONDITIONS. These terms and conditions have been filed at the Registry of the Rotterdam District Court. The Dutch law is applicable on all
our agreements. KVK nr. 34043947 | VAT/BTW nr. NL.0034.76.443.B01 | IBAN NL94ABNA 0565320300
4.1
DEMOBILISATION
The unit is equipped with fork lift pockets to demobilize this mixing unit.
Prior to lifting the mixing unit a few handlings must be made:
1.
Drain the unit by opening the drain valve on the pump and bottom of tanks
2.
Undo all hoses and open all (drain) valves
3.
Clean the whole unit including the inside of the tank
When all this is done you can lift the unit with a forklift.
NEVER:
1.
Stand or walk underneath the load
2.
Use certified lifting equipment
4.2
LONG-TERM STORAGE
When the mixing unit is not being used for more than 3-4 weeks.
Make the following preparations:
1.
Drain all the mud out of the unit
2.
Drain mud from the tank and MCM pump
3.
Flush the AMTEQ pump with clean water, open all valves
4.
Check to see if oil changes have to be made
5.
Clean the entire unit
