background image

0905

Combo Smoke/CO Alarm Instruction

Manual

Model No.: GS883-A

Thank you for purchasing this Combination 
Smoke/CO alarm GS883-A. This device is a product
that has been built using state-of-the-art technology.
This device is battery operated and features a non-
replaceable, sealed battery and smart silence 
nuisance alarms.
This instruction manual contains important 
information on starting operation and using the 
device. Store this instruction manual in a safe place 
for future reference. 
This instruction manual is a part of this device – 
bear this in mind if you pass on this device to 
others.
Please take a few minutes to thoroughly read the 
instruction manual and familiarise yourself and your
family with its operation. 

Table of Contents

1. What to do if the smoke alarm sounds
2. What to do if the CO alarm sounds
3. Product important information
4. Installation instructions
5. Understanding your Combo Smoke/CO alarm
6. General maintenance
7. Carbon monoxide overview
8. Battery information
9. Product Specifications
10. Deactivation of alarm
11. Good safety habits - develop and practice a 
plan of escape
12. Manufacturer and Customer service 
information
13. Warranty Information
14. Warranty card

1. What to do if the smoke alarm 

sounds 

Smoke alarm pattern is three long 

beeps, repeating every 1.5 seconds.

The ALARM indicator(red) will flash 

the same pattern.

The smoke alarm takes precedence when both 
smoke and carbon monoxide are present.

1.1 What to do in case of fire

1. Do not panic; stay calm.
2. Leave the building as quickly as possible. Touch 

doors to feel if they are hot, do not open but use an
alternate exit that is not hot.  Crawl along the floor 
and do not stop to collect anything.

3. Meet at a pre-arranged meeting place outside the 

building.

4 .   C a l l   t h e   f i r e   d e p a r t m e n t   f r o m   o u t s i d e   t h e
building.
5. Do not go back inside a burning building. Wait 

for the fire department to arrive.

NOTE: These guidelines will assist you in the 
event of a fire, however, to reduce the chance that
fires will start, practice fire safety rules and 
prevent hazardous situations.

1.2 Practice fire safety

If the smoke alarm sounds, and you have not pushed
the test button, it is warning of a dangerous 
situation, your immediate response is necessary. To 
prepare for such occurrences, develop family escape
plans, discuss them with all household members, and
practice them regularly.
1. Expose everyone to the sound of a smoke alarm 

device and explain what the sound means.

2. Determine two exits from each room and an 

escape route to the outside from each exit.

3. Teach all household members to touch the door 

and use an alternate exit when the door is hot, 

             

1

 / 

14                      

GS883-A Instruction Manual Rev. G

19

EN 14604:2005/AC:2008 
EN 50291-1:2018

 

DOP:883-CPR-0002

Summary of Contents for GS883-A















Reviews: