6
Choke Rod
The choke is used to provide an enriched fuel mixture when starting a cold engine. It can be
opened and closed by operating the choke rod manually. Pull the rod out toward CLOSED to
enrich the mixture for cold starting.
AC Receptacle
Only a 230V appliance is being connected to any of the 230V 3-prong receptacles
。
Or
Only a 120V appliance is being connected to any of the 120V 3-prong receptacles, a 240V
appliance is connected to the 4-prong receptacle
。
Ground Terminal
The generator ground terminal is connected to the frame of the generator, the metal
non-current-carrying parts of the generator, and the ground terminals of each receptacle.
DC 12V Binding Post
The DC 12V binding post may only be used for charging 12 volt automotive type batteries.
DC Circuit Protector
The DC circuit protector automatically shuts off the DC battery charging circuit when the DC
charging circuit is overloaded, when there is a problem with the battery, or when the
connections between the battery and the generator are improper.
Oil Alert System
The Oil Alert system is designed to prevent engine damage caused by an insufficient amount of
oil in the crankcase. Before the oil level in the crankcase can fall below a safe limit, the Oil Alert
system will automatically stop the engine (the engine switch will remain in the ON position). The
Oil Alert system should not take the place of checking the oil level before each use.
If the engine stops and will not restart, check the engine oil level before troubleshooting in other
areas.
