2.3 Responsibility of the machinery manufacturer
Where a machinery manufacturer integrates the Safety Lock into a machine or
plant as a safety component, the machinery manufacturer must fulfill the fol-
lowing obligations:
• Select and integrate the Safety Lock according to DIN EN ISO
12100:2011 and the standards and regulations applying to the specific
application case.
• Inform the operating company that the Safety Lock has been integrated
into the overall machine.
• Instruct the operating company on how to install, put into service, perfor-
mance test, disassemble and dispose of the unit in the specific application
case.
2.4 Personnel requirements
The tasks set out in this manual may only be carried out by authorized spe-
cialist personnel.
A
specialist
is a person who possesses the appropriate skills and knowledge
of the relevant standards and regulations based on his or her professional
training. A specialist may fulfill the following requirements:
• assess scheduled work procedures
• identify potential hazards
• take necessary measures to eliminate hazards
• apply accepted technical standards, rules and directives
• carry out necessary repair and assembly work
2.5 Personal protective equipment
Personal protective equipment preserves the health and safety of personnel
when carrying out their work. Use the personal protective equipment stipu-
lated in the various sections of this manual.
Industrial helmet
An industrial helmet protects the head against injury from falling objects,
swinging loads and bumping against fixed obstacles.
Goggles
Goggles protect the eyes against flying parts and splashing liquids.
Protective gloves
Protective gloves protect the hands against friction burns, scrapes, cuts or
deeper injuries, and against touch contact with hot surfaces.
Safety boots
Safety boots protect the feet against crushing, falling items and falling on slip-
pery floors.
Ear defenders
Ear defenders protect the ears against excessively loud noise and prevent
acoustic trauma.
Operating Manual
Safety Locks series KRGP
Pneumatic / compressive load
Original instructions BA-S12-en-1-15
© SITEMA GmbH & Co. KG . G.-Braun-Straße 13 . 76187 Karlsruhe (Germany) . Phone: +49(0)721/98661-0 . Fax: -11 . www.sitema.com
7/28
