Sitecom N600 X5 User Manual Download Page 49

Page: 49 / 123

Type

This is the protocol type to be forwarded. You can choose to forward

“TCP” or “UDP” packets only, or select “both” to forward both “TCP” and “UDP”

packets.

Port Range

The range of ports to be forward to the private IP.

Comment

description of this setting.

Add

Fill in the "Private IP", “Type”, “Port Range” and "Comment" of the

setting to be added and then click "Add". Then this Port Forwarding setting

will be added into the "Current Port Forwarding Table" below.

Remove

If you want to remove a Port Forwarding setting from the "Current

Port Forwarding Table", select the Port Forwarding setting that you want to

remove in the table and then click "Delete Selected". If you want to remove

all Port Forwarding settings from the table, just click "Delete All" button. Click

"Reset" will clear your current selections.

Summary of Contents for N600 X5




























































































































Search results

Summary of Contents for N600 X5

Reviews:

Related manuals for N600 X5

Brands by name

Popular brands

Sitecom N600 X5, User Manual

Search results

Summary of Contents for N600 X5

Reviews:

Related manuals for N600 X5

Brands by name

Popular brands