Please check
www.sitecom.com
for up to date drivers & utilities, manuals and support
43
Note:
You need to give your LAN PC clients a fixed IP address for Port Forwarding to work properly.
Type
This is the protocol type to be forwarded. You can choose to
forward “TCP” or “UDP” packets only or select “both” to forward
both “TCP” and “UDP” packets.
Port Range
The range of ports to be forward to the private IP.
Comment
The description of this setting.
Add Port Forwarding
Fill in the "Private IP", “Type”, “Port Range” and "Comment" of
the setting to be added and then click "Add". Then this Port
Forwarding setting will be added into the "Current Port
Forwarding Table" below. If you find any typo before adding it
and want to retype again, just click "Clear" and the fields will be
cleared.
Remove Port Forwarding
If you want to remove some Port Forwarding settings from the
“Current Port Forwarding Table", select the Port Forwarding
settings you want to remove in the table and then click "Delete
Selected". If you want remove all Port Forwarding settings from
the table, just click "Delete All" button. Click "Reset" will clear
your current selections.
