Siteco Connect 31, Commissioning Instruction

Page: 29 / 38

28 SITECO Connect 31 Gen2 Commissioning Instruction V1.0 262639-002
7. Troubleshooting
behavior reason repairing
sensor does not switch lights OFF delay time T1 too long reduce delay time T1
motion is detected motions or thermal radiation are detected
sensor not connected correctly check electrical connection
=> LED flashes when motion detected?
motion not detected limited by furniture or windows
sensor is deactivated activate with APP
push button does not switch the
lights ON push button is deactivated activate with APP
push button not connected correctly check electrical connection
controller does not work green / red LED on the controller lit?
=> controller ready for operation
controller does not work red LED means controller was RESETTED
by the controllers button
=> configure new with APP
DALI wiring check wiring between controller and
luminaires
touchpanel does not work battery empty or not inserted green LED does not flash when actuated
Touchpanel not in network activate with APP
Touchpanel not configurated activate with APP
Touchpanel not paired red LED does not flash when actuated
=> configure with APP
Controller not in function red LED means Touchpanel was
RESETTED by the controllers button
=> configure new with APP