BA_ST_DSG-D_EN_36-21.docx
9
Digital Angle Display
2.6.1
Calibrate indicator to the fence
Pressing the
key will set the display to the value 0.00. This can be done
at any angle setting of the fence.
To return the display to its original position (0.00 at 0° resp. 90°), swing
the fence against the fence screws (refer to
Figure 2) and then press
key.
2.6.2
Battery change
The power supply for the position indicator is provided by two 1.5 Volt
batteries type Micro "AAA", which are accessible by loosening the two
screws of the battery case on the rear of the unit. When the battery
symbol (see
Figure 10) appears in the display, the battery should be
replaced as soon as possible. Please ensure that the polarity is correct
(see
Figure 10: Digital angle display
Figure 11: Battery case (rear)
Since the current angular position is not saved when the battery is changed, the indicator
must be recalibrated to the fence afterwards (as described in section
Fire, explosion and burn hazard!
Never recharge batteries or expose them to temperatures
above 85° C. Please dispose of the used batteries properly.
2.6.3
Further documentation
Further documentation and manuals for the digital display can be found on the manufacturer's website:
3
Wall Bracket
The wall bracket for the DSG-D offers
a practical way to store the fence
within easy reach when not in use.
It is already included in the scope of
delivery.
The two clamping pins shown in
Figure 12 are located on the un-
derside of the fence. They can be
used for quick and tool-free attach-
ment of the device to the wall
bracket.
Figure 12: DSG-D wall bracket
P
Wall bracket
Clamping pins
