BA_ST_DSG-D_EN_36-21.docx
4
2
Working with the DSG-D
Placing the fence on the Panhans edging table
CAUTION: Secure the machine against unintentional switch-on!
Figure 2: Placing the DSG-D on the edging table
Figure 3: Clamping the DSG-D on the edging table
1.
Move eccentric lever to "handle up" position.
2.
Place the fence on the edging table.
3.
Check whether the press-on screws are in
contact with the edging table and re-adjust
if necessary.
1.
Loosen the two M8 screws. This ensures that the
fence rests correctly on the edging table.
2.
Clamp the fence by tightening the eccentric
lever.
3.
Retighten the two M8 screws.
Press-on screw
Eccentric lever
M8 screws
