11
Note:
if within 5 sec it is not "confirmed", the days-meter comes back to the current counting value
AL2:
Indicates lamp failure. Check:
o
Lamp connection.
o
If lamp is burned by testing another lamp.
o
If lamp starter has failed by testing a new lamp.
In case of lamp replacement press and hold for less than 5 seconds the (◄┘) button to restart the
working days count down.
ATTENTION
: Do not replace the lamp with powered panel!
Press and hold for more than 9 seconds the
(
◄
┘
)
button to silence the alarm for 7 days (max 4
times).
Working days count down
Alarm + Buzzer
Remaining working days of the
lamp. Keep pressed for less than
5 sec. (◄┘).
The value of the hour-meter
will start to flash.Within 5 sec
press again the button to
resetthe hour-meter.
Note:
if within 5 sec it is not
"confirmed", the hour-meter
comes back to the current
counting value
Reamining lifespan of the lamp
(restarted)
DISPLAY OFF
:
The fuse of the pcb is blown. Unscrew the cap of the power supply box.
Open the small black box closed to the power supply plug (see picturebelow), replace the fuse:
113
AL2
AL2
113
365
Press and Hold > 9 sec.
(
◄
┘
)
To stop the buzzer
Fix AL2 alarm, cut power
and give power again
Alarm AL2
Event