Turning OFF the Appliance
With the system ON, press the ON/OFF Key on the Transmitter. The Transmitter LCD display will
only show the room temperature (Fig. 8). At the same time the IFC will be commanded to turn
off the burner. Depending on the system mode (IPI or
CPI) the pilot may shut off (IPI) or remain lit (CPI) and the
appliance burner turns OFF. A single “beep” from the
Receiver confirms reception of the command.
NOTE: see Continous Pilot/Intermittent Pilot (CPI/IPI)
selection paragraph.
15
Fig. 8:
Remote Control display.
Remote-Flame Control
The proflame has six (6) flame levels. With the system on, and the flame level at the maximum in
the appliance, pressing the Down Arrow Key once will reduce the flame height by one step until
the flame is turned off.
The Up Arrow Key will increase the flame height each time it is pressed. If the Up Arrow Key is
pressed while the system is on but the flame is off, the flame will come on in the high position.
( Fig. 8 & 9 ) A single “beep” will confirm reception of the command.
Fig. 8:
Flame Off
Flame Level 1
Fig. 9:
Flame level 5
Flame Level Maximum
