Auto Jet Instruction Manual
14
19/04/2018 Rev:2.0.0
CENTRAL VACUUM SYSTEMS
ByTecnoplus
s.r.l.
8.4 Connection of the tube network
Connect the separator to the pipe
network of air intake, using the
sleeve and the metal
clamps supplied.
Connect, using the sleeve and the
supplied metal clamps, the AUTO
JET separator to a dust separator
with fi lter cartridge
The sizing of the suction unit and of the suction lines leading to the Auto Jet Turbix must be made giving
consideration to the number of simultaneous users and the type of material to be vacuumed.
N.B.
It is advisable to position AUTO Jet as close as possible to the Industrial Motor to avoid power loss due
to tube network length and the use of connecting bends and branches.
The Sistem Air Technical Offi ce is available for consultancy and / or estimates.
At the installa-
tion network
Tubing
Suction motor unit
AUTO Jet
Example of connection of the AUTO Jet separator:
Dust separator
with fi lter cartridge
Summary of Contents for AUTO Jet TURBIX
Page 2: ......
Page 22: ...Auto Jet Instruction Manual 22 19 04 2018 Rev 2 0 0 CENTRAL VACUUM SYSTEMS ByTecnoplus s r l...
Page 23: ......
