Instruction manual T-Smart
20
27/05/14 Rev:1.0.0
CENTRAL VACUUM SYSTEMS
ByTecnoplus
s.r.l.
11 USE OF THE VACUUM CLEANER
When the
T-Smart
vacuum cleaner is connected to the power supply, it can be started every time a
fl
exible
hose is plugged into any of the suction inlet in the different rooms.
The vacuum cleaning is started thanks to an electrical contact assembled directly in the inlet which, once
activated, allows the start of the suction motor of the vacuum cleaning unit.
Routine maintenance involves the dust bag replacement.
11.1 Switching on the vacuum cleaner
11.2 Using the vacuum cleaner
Press the switch-on button. A warning
light will appear to indicate that the
appliance is connected to the power
supply.
Fix the cleaning accessory most suitable for the
desired task, to the grip handle of the
fl
exible
hose. Select the accessories according to the
area to be cleaned, the type of dirt, etc.
1
1
Insert the other end of the
fl
exible hose in the
suction inlet on the wall. This will switch on
the system suction motors thanks to an
electric signal in the suction inlet.
Once you have
fi
nished cleaning, remove the
fl
exible hose from the suction inlet by gently ac-
companying the closing
fl
ap until it reaches its housing. If the
fl
ap is left to close by itself, it will
violently hit the suction inlet because the suction system is still working and the vacuum will pull
the
fl
ap powerfully against the suction frame.
The vacuum cleaner is programmed to take a few seconds before switching off to ensure that
the suction action has been completed throughout the pipe network.
2
Summary of Contents for 3100.0SM
Page 2: ......
Page 58: ...Instruction manual T Smart 28 27 05 14 Rev 1 0 0 CENTRAL VACUUM SYSTEMS ByTecnoplus s r l...
Page 59: ......
