Siruba VC008B, Instruction Book / Parts List, Page: 27 / 60

Introduction
P22
圖
30/Fig.30
When doing adjustment,please refer to
(Fig.30).
1.Loosen the fixed screw A of the feed
dog C.
2.Move the feed dog C up and down
to match the condition mentioned
above,and then tighten the screw A.
3.Loosen the fixed scerw B of the height
fixed pin D,and move the fixed pin to
top.Lock the screw B after the pin D
reach the bottom of the feed dog C.
4.At this moment,please confirm the
parallel between the left and the right
side of the feed dog C.
調整時參照
(
圖
30)
1.
放鬆送具
C
固定螺絲
A
。
2.
上下移動送具
C
使符合上述條件時，再鎖
緊螺絲
A
。
3.
將高度固定銷
D
之固定螺絲
B
放鬆，調整
固定銷至頂，直至送具
C
底部再鎖緊螺絲
B
。
4.
此時亦應確認送具
C
左右方向的平行。