- 33 -
HEMMING (Optional)
1. Raise the presser foot and the needle to its highest
position.
2. Fold over the fabric edge about 3mm and place it
under the foot.
3. Insert the fabric fold into the spiral opening of
hemmer foot.
4. Lower the presser foot.
5. During the sewing, left hand holds on the fabric
edge and folds to the left a little. Right hand holds
on the fabric front end and leans to left about 10
degrees. Then start to sewing.
Only suitable materials can be used and some
practice may be necessary to achieve best result.
QUILTER GUIDE (Optional)
1. Slide quilter guide arm through hole on top of
presser foot holder.
2. Move the quilter guide to required stitch distance.
3. Sew one line to test the machine stitches, then
adjust the quilter position you wish to use.
Quilter guide is not included in the standard
accessories. It’s an option part.
BUTTON SEWING
1. Press the “feet dog height lever” to lower the feet
dog.
2. Use button sewing foot and attach firmly.
3. Place the button between presser foot and fabric
and lower presser foot.
4. Manually turn hand wheel toward you and test
carefully that the needle goes through the centre
of first one hole and then the other.
5. By median speed sew 5
－
6 stitches.
Match
01
