Siruba 700Q, Instruction Book

Page: 46 / 64

-40-
(2)Control Box Adjustment ( Fig.47)
(
2
)控制箱調整
( 圖 47)
圖
47/Fig. 47
為 LED 燈，綠色燈表示控制器正常運
作，紅燈表示控制器異常，若閃燈其
原因請詳閱故障檢修。
為速度調整旋鈕，可用一字起子調整
，順時針調整縫速加快，反之變慢。
為前吸風針數調整旋鈕
為後吸風針數調整旋鈕
為控速器插座
LED: Green color stands for the
controller being working well and red
color stands for the controller being
abnormal. Please refer to the
troubleshooting section if you see LED is
blinking.
Speed adjustment switch: Use a slotted
screwdriver to adjust . Clockwise
adjustment would increase the sewing
speed. If adjust counter clockwise
direction would decrease the sewing
speed.
Front air suction adjustment switch
Rear air suction adjustment switch
Speed controller socket
2 .前後吸風針數/速度 VR 說明
( 1 )自動切線模式( DIP 4 SETUP ON)
a. 前吸風針數調整旋鈕 7 ：
(表 )
2.Front & Rear suction needle numbers /
Speed VR features.
(1)Auto chain cutter(DIP 4 SETUP ON):
a.Front suction needle numbers(SW2)
( Table7 )
刻度 Scale 0 1 2 3 4 5 6 7 8 9
針 數
Needle 0 2 4 6 8 10 12 14 16 18
b. 後吸風針數調整旋鈕： 8
(表 )
b.Rear suction needle numbers(SW3)
: ( Table8 )
刻度
Scale 0 1 2 3 4 5 6 7 8 9
針 數
Needle 0 4 8 12 16 20 24 28 32 36
( 刻 度 0 為 不 吸 風 切 線)
(
0 means no suction & cutter function )
( 刻 度 0 為 不 吸 風 切 線)
(
0 means no suction & cutter function )
表
7/Table7
表
8/Table8