Sirona inFire HTC, Operating Instructions Manual

Page: 17 / 30

61 30 459 D 3497
D 3497
.
201.01.04
.
02 06.2009 17
Sirona Dental Systems GmbH
6
Operation
Operating Instructions inFire HTC Programs
båÖäáëÜ
6.3.5 Starting the program
➢ Start the program with the Start/Stop key.
ª
The furnace door closes automatically. The furnace door automatically
opens at the end of the program.
6.3.6 Lifting the sintering tray out of the furnace
✔ The furnace door is open.
1. Use the crucible fork to lift the sintering tray off of the rack.
2. Place the sintering tray on the crucible rack with the crucible fork.
6.4 Programs
Explanation With the inFire HTC sintering furnace, sintering is controlled via callable
programs [ 18].
● inFire has fixed programs for sintering certain dental oxide ceramics.
● There are freely programmable programs for other dental oxide ceramics.
Overview
inFire features the following programs:
● 5 fixed programs [ 17] (01-05)
● 5 reserved programs (06-10)
● 20 freely programmable programs [
19] (11-30)
Starting the program The programs can be started either directly [ 18] or time-controlled via the
casting time function [ 18].
6.4.1 Fixed programs
Explanation inFire HTC features fixed programs for various materials and manufacturers.
Overview
Program
No.
Designation
01 SIRONA
inCoris ZI
02 SIRONA
inCoris AL
03 VITA
In-Ceram YZ
04 VITA
In-Ceram AL