5
OXYGEN DEPLETION SYSTEM
If the Oxygen Depletion System (ODS) operates, i.e. shuts off the gas supply to the fire, WAIT FOR THREE
MINUTES and follow the operating instructions on pages 4 and 5.
The ODS is designed to shut off the gas supply to the burner if the oxygen content of the room falls below a
certain level. If it continues to operate then contact your installer to have the fire and flue system checked.
SERVICING AND MAINTENANCE
If your fire requires servicing or maintenance, please contact your supplier quoting the model name
(e.g.
eco
2
)
and the serial number. Both of which can be found on the data badge, which is located next to
the control knob behind the ash pan cover.
A full service kit is available.
FUEL BED ASSEMBLY
Using the two brackets supplied in the fixing kit included are two _” screws, fold these brackets by
hand with the black painted facing forward locate them into the two slots in the burner bracket and
fix them in place using the screws provided. Fit the burner into the housing then place the rear
ceramic as shown. Then fit the front matrix in position between the two upright brackets, making
sure that it is fully down to the burner bracket.
A
Base matrix
Rear matrix
must sit on this face
Place these
bracket as shown
Fix in place using 2 _ screws
Figure 1
VII-11-09
