12
10.1 TO REMOVE THE BURNER
UNIT
(a) Remove the fender and ash pan cover
together with all the fuel effect pieces.
(b) Disconnect the appliance from the gas-
isolating elbow and remove the two screws
(refer to Figure 4.). The burner tray can
now be lifted up and away from the base
of the box.
(c) Re-assemble in the reverse order ensuring
that the tabs on the burner support bracket
on the rear of the burner fit into the slots
on the firebox sides (see Figure 5.)
Figure 5
10.2 TO REMOVE THE
THERMOCOUPLE ASSY.
(a) Follow 10.1 above to remove the burner
tray.
(b) Disconnect the thermocouple connection
from the control unit.
(c) Remove the pilot tube.
(d) Disconnect the spark electrode lead
(e) Remove the two screws fixing the assy.
10.3 TO REMOVE THE GAS VALVE
(a)
Follow 10.1 above to remove the burner
tray.
(b)
Disconnect the lead from the control unit
(c)
Disconnect the thermocouple nut from
the rear of the valve
(d)
Disconnect the pilot tube from the valve
(e)
Remove the injector tube
(f)
Remove the two screws securing the
valve.
(g)
Assemble in the reverse order.
VII-11-09
