Sirman PD VC Operating And Maintenance Manual Download Page 5

 12 

FIG. n°6 - Correct position for cooking 

 5 

 

CHAP. 1 - INFORMATION ON THE MACHINE

 

 
1.1  - GENERAL PRECAUTIONS 



The machine must be operated only by highly qualified people who are 
fully aware of the safety measures described in this manual. 

 



In case of a personnel turn over, training is to be provided in advance. 

 



Before starting cleaning and maintenance operations, disconnect the plug 
from the supply socket. 

 



Assess the residual risks carefully to carry out cleaning and maintenance. 

 



Cleaning and maintenance require great concentration. 

 



A regular control of the electric supply cord is absolutely necessary; a 
worn-out or damage cord is very dangerous. 

 



If the machine shows malfunctions, it is recommended not to use it and to 
abstain from trying to repair it; please call the “Service Centre”. 

 



The CERAMIC GLASS GRILLS are used for cooking, heating, toasting, 
and to grill foodstuffs. Do not use the machine for other uses or for any 
products other than foodstuffs.  

 



The manufacturer is not liable in the following cases: 



if the machine has been tampered by non-authorized personnel; 



if some parts have been substituted by non original spare parts; 



if the instructions contained in this manual are not followed 

accurately



if the machine surface is not cleaned with  the right product. 

 
1.2 - SAFETY DEVICES INSTALLED ON THE MACHINE 
1.2.1 - electrical safety devices 

The electrical safety devices installed on the machine, described in this 
manual,  complies with  

EC 2006/95, 2004/108, 2007/19.

  

Even though the CERAMIC GLASS GRILLS are provided with electrical and 
mechanical protections (when the machine is working and for maintenance 
and cleaning operations), there are still 

RESIDUAL RISKS 

that cannot be 

eliminated completely, these risks are mentionned in this manual under 

WARNING

. These risks are scalds caused by the loading and unloading of 

the product, or other kind of injuries due to the maintenance operations.

 

 
 
 

Summary of Contents for PD VC









Reviews: