4
7.2
- POWER SUPPLY CORD
CHAP. 8 - DISPOSAL OF THE MACHINE
pag.14
8.1
- PUTTING THE MACHINE OUT OF SERVICE
8.2
- WEEE Waste of Electric and Electronic Equipment
CHAP. 9 - ELECTRIC CIRCUIT DIAGRAM
pag. 15
9.1
- 220-240V electric circuit diagram
13
CHAP. 6 - GENERAL CLEANING
6.1 - INTRODUCTION
The machine cleaning is an operation that has to be performed at least
once a day and, if necessary more often.
All the machine parts, that are in contact with the product, must be
cleaned accurately .
Never clean the machine by means of compressed water or water jets.
It is recommended not to clean the CERAN GRILL when the cooking
surface is hot, but only when it is cold.
Take the same care
when emptying the collecting tray for gravy.
It is advisable to perform these cleaning operations when the CERAMIC
GLASS GRILLS temperature is at the minimum so that the residual grease
which sticks to the grid can melt.
It is absolutely forbidden to pour water or other liquids on the grid when it
is hot, because the changes of temperature can provoke their breaking.
WARNING
: Before performing any cleaning operation,
disconnect the
machine plug from the mains to insulate it from the rest of the
installation.
CHAP. 7 - MAINTENANCE
7.1 - GENERAL FEATURES
Before performing any maintenance operations, it is necessary to
disconnect the plug from the socket to insulate completely the machine
from the rest of the system.
7.2 - POWER SUPPLY CORD
Periodically check whether the power supply cord is worn-out and, if this is
the case, please call the “SERVICE CENTRE” to have it replaced.
