5
Power On
z
Insert the CF memory card that has Picture, Music, Movie or WMV9 files.
z
Press the “POWER” button to power on the SIRKOM SRK-1080PW-A Player, then press
the “TV MODE” button to select the output mode.
Status After Power On
z
Status 1
：
If the “AUTOPLAY (Movie or Picture)” function is enabled and there are movie
or picture files in the CF card, the SIRKOM SRK-1080PW-A Player will auto play movie
or picture files on the CF card after power on.
z
Status 2
：
If the “AUTOPLAY” function is disabled, after power on the main menu will
appear as shown in the following figure. There are two groups in the main menu
(“/mnt/CF” and “SETUP”).
NOTE
：
1.
The pop-up window that shows the state of wireless will appear later, if the wireless network
is enabled when the SIRKOM SRK-1080PW-A Player is turned on.
2.
The pop-up window that shows the IP address will appear later, if DHCP mode is selected
when the SIRKOM SRK-1080PW-A Player is turned on.
Power Off
：
Press the “POWER” button again to power off.
6. START THE SRK-1080PW-A
6
In the main menu, please using the “
▼
” button on remote control to select the “
SETUP
”
item, then press the “ENTER” button. You will be presented with the SIRKOM
SRK-1080PW-A Player settings screen.
You can also press the “
SETUP
” button on remote control to directly open the settings
screen. (If there is file that is being play, please stop first.)
There are four groups of sub-menu in the main menu (“Network Setup”, “FTP Setup”,
“Video Setup” and “Other Setup”).
In the settings screen, you can use the “
▲
、
▼
、
▲
、
▼
” buttons to select an item, and press
the “ENTER” button to confirm the selection.
Press the “SETUP” button on remote control to save and quit the settings screen.
7.1 NETWORK SETUP
Network with
：
Select your network connection Disable/ RJ45/ Wi-Fi.
IP Assigned by DHCP
：
If you have a DHCP-enabled router, please select “On”, then the
router will automatically assigns an IP address to the SIRKOM SRK-1080PW-A Player. If
you don’t have a DHCP –enabled router, select “Off” and type the network information in
“
Assign IP Address
”.
Assign IP Address
：
If the SIRKOM SRK-1080PW-A Player is connected to a network
without a DHCP server or you want to use Local FTP Server function, type the fixed IP
address, Mask, Gateway and DNS for the SIRKOM SRK-1080PW-A Player.
PS. Refer to 5.1 for how to enter IP address by remote control.
7. SETTING UP
