SiriusLab Electronics RFM Guitar pedal 1 User Manual Download | Manualshive

Page: 8 / 8

background image

SiriusLab Electronics

RFM Guitar Pedal 1 User Guide v1.0

21. Warranty

This device comes with a limited warranty on the device functionality.
Any damages caused by the user will not be accepted. This includes water
damage, mechanical damage and electrical damage (for example using the
wrong charger).

22. Note from the manufacturer

This guitar pedal has been designed with a lot of love and passion and we hope
you will enjoy using it as much and even more than we did designing it,
assembling it, testing it and then ﬁnally using it.

If any problems should arise during use, please contact SiriusLab Electronics for
help and advice..

SiriusLab Electronics contact information:

eMail:

[email protected]

Web:

https://www.siriuslab-electronics.com/

Manufactured in the United Kingdom.

If you like our products, please drop us a word of support and leave a review on
our social pages.

Facebook:

https://www.facebook.com/SiriusLab.Electronics

Instagram:

https://www.instagram.com/siriuslab_electronics/?hl=en-gb

Google:

https://g.page/SiriusLab/review?gm

«
...
6
7
8

Summary of Contents for RFM Guitar pedal 1









Reviews:

No comments

Related manuals for RFM Guitar pedal 1

Brand: Radio Shack Pages: 24

Brand: Radial Engineering Pages: 2

Brand: Tascam Pages: 164

SUPER PHASE SHIFTER SP400

Brand: Behringer Pages: 2

Brand: Source Audio Pages: 39

TWINTONE Mark III

Brand: Koch Guitar Electronics Pages: 13

Brand: M-Audio Pages: 12

Brand: M-Audio Pages: 45

Brand: Mad Bean Pedals Pages: 9

VFE Switching Board V.2

Brand: Mad Bean Pedals Pages: 18

Brand: Pro Co Sound Pages: 2

Virt Iter Legio

Brand: Noise Engineering Pages: 8

Brand: Rotel Pages: 7

Brand: LYINTL Pages: 16

JUSTIN CHANCELLOR CRY BABY

Brand: Dunlop Pages: 5

Brand: Noise Reap Pages: 2

Brand: Noise Reap Pages: 4

Brand: adt-audio Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands